Applicators are provided with an increase in productivity, white metal finish and a 1.5 to 2.0 mil profile on steel.
SofStrip Profile Formula Soda Blast
SofStrip Profile Formula soda blast abrasive is manufactured with our largest soda blast crystals, flow aids and 25 percent 80 grit garnet abrasive. Applicators are provided with an increase in productivity, white metal finish and a 1.5 to 2.0 mil profile on steel. Page 3 of 3 2. INCOMPATIBILITY Materials to avoid: Can react rapidly with strong acids to form carbon dioxide gas, salt and water. 3. HAZARDOUS DECOMPOSITION PRODUCTS Avoid temperatures above 228 °F Sodium carbonate and carbon dioxide. 4. CONDITIONS CONTRIBUTING TO HAZARDOUS POLYMERIZATION Will not occur. IX. DISPOSAL, SPILL OR LEAK PROCEDURES 1. WASTE DISPOSAL METHOD Dry landfill if not contaminated with other hazardous waste. Follow local, state and federal regulations. 2. STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED Put into dry clean containers. Avoid combination or contact with lime dust as caustic soda may form. X. SPECIAL PROTECTION INFORMATION 1. VENTILATION REQUIREMENTS Maintain dust levels below nuisance TLV. 2. SPECIAL PERSONAL PROTECTIVE EQUIPMENT None. XI. SPECIAL PRECAUTIONS Minimum NIOSH approved dust mask or respirator is recommended. It is recommended that operators do not wear contact lenses. Ear protection must be worn during blasting operation by operator and support personnel. Wear safety glasses, goggles and or face shield during blasting operation. When blasting inside vessels a forced air blast hood or full face respirator must be worn.